Description
Heavy-Duty Foldable Steel Rack for Industrial Plastic Rolls
The Folding Roll Storage Rack can store all types of plastic rolls, movie reels, and similar cylindrical raw materials, mainly used in factories where they store large quantities of material rolls to be handled, such as film rolls. It is manufactured with a reinforced steel framework and a design that makes it easy to fold, so when you fold down the rack it takes only half the space, thus allowing you to place several racks in a limited space.
This industrial roll storage rack has a load capacity of 1,500 kg and overall dimensions of 1550 × 1200 × 620 mm and can be considered as one of the strong ones in this category, even when used under the most extreme conditions the rack remains stable and it is even possible to have more materials rolled around it.
The rack minimizes the chance of a roll rolling off and makes handling of stored roll material more orderly and space in the warehouse can be maximized to the fullest extent possible.
Key Features of Our Roll Stand
Plastic roll holder that is made of folded flat so that when it is not in use it can be stored compactly to avoid being a hindrance, therefore, when storage requirements of the business vary and they want to adapt new storage arrangements the storage stand can be reconfigured in a matter of minutes. It helps you:
To occupy less space by empty racks.
To support warehouse and workshop layouts that are flexible.
Reinforcing Steel for a Stable Base
One of the common problems with plastic rolls when not stored properly is that they tend to move or fall off from their base when they are not kept on the right kinds of shelves. This product uses a thick steel frame and strong welding methods to construct a very sturdy rack capable of holding even heavy rolls of plastic without letting them down at all.
A sturdy construction of this type helps to prevent any possible unwanted motion of the rolls while storing or even while handling.
Load Capacity of the Racks
The specified maximum load for a single rack is 1500 kg making this a heavy-duty rack that can handle a lot of material. The use of reinforced metal helps the rack resist deformation under normal working conditions. This allows the rack to be used repeatedly in warehouses as well as manufacturing plants.
Following the principles of correct load distribution as well as not exceeding the rated capacity for any particular item are the prerequisites for safe running of the rack.
Corrosion-Preventing Surface Treatment
Anti-rust finish is done to all metal parts of the rack to minimize corrosion and damage from the day-to-day usage thereby allowing prolonged service life of the rack in industrial settings. This, among other things, can also help to decrease the frequency of maintenance and replacement of parts.
Selection of appropriate finish should depend upon the actual working environment and its exposure conditions.
Product Specifications
| Item | Specification |
| Product Name | Folding Rack for Plastic Roll Storage |
| Overall Dimensions | 1550 × 1150 × 1400 mm |
| Unit Weight | 122 kg/set |
| Rated Load Capacity | 1,500 kg/set |
| Main Material | Steel |
| Construction | Reinforced welded frame |
| Structure | Foldable |
| Surface Treatment | Anti-rust treatment |
Note: Confirm the folded dimensions, compatible roll sizes, and applicable load conditions with the manufacturer before ordering.
Applications of Folding Plastic Roll Racks
This plastic roll storage rack is suitable for industrial facilities that need organized storage for cylindrical materials.
Plastic film manufacturing: Stores film rolls between production and processing stages.
Packaging facilities: Organizes plastic film and packaging materials for easier inventory management.
Industrial warehouses: Provides dedicated storage for compatible rolls while helping improve space utilization.
Production workshops: Supports organized material staging near manufacturing and processing areas.
The rack’s suitability depends on roll diameter, width, weight, support requirements, and the available handling equipment.
Custom Plastic Roll Storage Rack Solutions
Different materials and warehouse layouts may require different rack dimensions or structural configurations. As an industrial storage equipment manufacturer, JULI can discuss project requirements and available customization options with buyers.
When requesting a custom folding rack, please provide:
Roll diameter, width, and individual weight.
Required load capacity and rack quantity.
Preferred dimensions and warehouse layout.
Loading and unloading method.
Surface treatment requirements and delivery destination.
These details help determine whether the specified model is suitable or whether a different configuration should be considered.
Frequently Asked Questions
What is the load capacity of this folding rack?
The specified model has a rated load capacity of 1,500 kg per set. Confirm the approved loading method and load distribution before use.
Can the rack be folded when not in use?
Yes. The rack features a foldable structure designed to reduce the space occupied by empty equipment. Follow the manufacturer’s instructions for folding and handling.
What materials can this rack store?
It is intended for compatible plastic rolls, film coils, and similar cylindrical industrial materials. Check the roll dimensions and weight against the rack’s approved specifications.
Can I request a customized plastic roll storage rack?
Contact JULI with your material dimensions, load requirements, quantity, and application details to discuss available customization options.
Request a Quote for Folding Rack for Plastic Roll Storage
Need a space-saving storage solution for industrial plastic rolls? Contact JULI to confirm product suitability, discuss customization requirements, and request a quotation.
Send us your roll specifications, required quantity, and destination country to help us prepare a suitable proposal.
